Neutral silicone sealant（Doors& Windows） Product introduction lOne-component, neutral curing, convenient lExcellent construction performance lHave good adhesion to most of construction materials lHave good compatibility with all the silicone sealant Application Applied to aluminum alloy doors and windows, plastic doors and
windows, steel doors and windows and most construction materials. Using Method Before using, it must be tested the compatibility and cohesive
force between the sealant and the material. And the surface must be
clean and dry;it will be operated after confirm the eligibility .
The interface which need to be covered with adhesive tape to cut
nozzle, take the plastic mouth on, and put it into the glue gun,
then glue sealant and strickle surface flat; finally, rob out the
remainder with the flannelette and remove the adhesive tape. Don’t
touch the interface within 48 hours. Use Constraints lDon’t use it on the wet or frosty surface; lDon’t use it on the oily or being exudate surface; lDon’t use it in the windtight location; lDon’t meet the surface of food directly; lDon’t use it on the interface which is long-term soaking and
burying in the ground; lDon’t use it on the newly-built(within two monthes after
built)beton or the sand lime surface; lDon’t use it on the location where the temperature is under 5℃,the humidity is less than 20% or the surface temperature is more than 40%. Attention lTo avoid repeated and prolon | 
