Silicone stone sealant

Silicone Stone Sealant

Production Introduce:

lSingle compositionneutral solid method of use.

lNo corrosion and pollution to the stones, ceramics and the precast cement.

lIt has a good adhesion function for most building material.

lWith good compatibility for all the silicone sealant.

lExcellent high & low temperature resistance performance, no brittle, hard, split ect. aswell as keep the flexibility below 50℃ to above 150℃ after weathering.

lExcellent weather ability, no influence under the sun, rain, snow, Ozone ect.

Application:

Suitable for the dry stone curtain wall works and the precast cement block works, concrete telescopic of tunnel and the road works, different high-grade doors and windows installation weather resistance filling sealed ect.

Using Method:

Before using, it must be tested the compatibility and cohesive force between the sealant and the material. And the surface must be clean and dry;,it will be operated after confirm the eligibility . The interface which need to be covered with adhesive tape to cut nozzle, take the plastic mouth on, and put it into the glue gun, then glue sealant and strickle surface flat; finally, rob out the remainder with the flannelette and remove the adhesive tape. Don’t touch the interface within 48 hours.

Use Constraints:

lDon’t use it on the wet or frosty surface;

lDon’t use it on the oily or being exudate surface;

lDon’t use it in the windtight location;

lDon’t meet the surface of food directly;

lDon’t use it on the interface which is long-term soaking and burying in the ground;

lDon’t use it on the newly-built(within two monthes after built)beton or the sand lime surface;

lDon’t use it on the location where the temperature is under 5℃,the humidity is less than 20% or the surface temperature is more than 40%.

Attention:

lTo avoid repeated and prolonged skin contact.

lPlease in a well-ventilated environment.

lWash with clean water in case of splashed into the eyes and go to the hospital immediately.